| Manufacturer | John Deere |
| Model | 318D |
| DATE OF SPECIFICATION - 1 October 2010 | |
| ENGINE | |
| Emission Rating | Interim Tier 4 |
| Engine Make / Engine Model | John Deere / PowerTech E 4024HT |
| Net Power, kW (hp) @ Rated rpm | 43.3 (58) @ 2600 |
| Gross power, kW (hp) | 47 (63) |
| Net peak torque, N-m (lb-ft) | 219 (162) |
| Displacement, L (cu in) | 2.4 (149) |
| Engine aspiration | Turbo. Intercooled |
| Fuel capacity, L (gal) | 70 (19) |
| HYDRAULIC SYSTEM | |
| Standard pump flow, L/min (gpm) | 68 (18) |
| Optional high flow, L/min (gpm) | 102 (27) |
| System pressure, kPa (psi) | 21374 (3100) |
| Hydraulic power, kW (hp) | 25 (34) |
| Optional high flow hydraulic power, kW (hp) | 40 (54) |
| PERFORMANCE | |
| SAE rated operating capacity, kg (lb) | 817 (1800) |
| SAE ROC with optional counterweight, kg (lb) | 885 (1950) |
| Tipping Load, standard, kg (lb) | 1634 (3600) |
| Breakout Force Boom, kN (lb) | 15.6 (3500) |
| Breakout Force Bucket, kN (lb) | 22.8 (5125) |
| Vertical lift geometry | Vertical |
| DRIVE TRAIN | |
| Maximum Ground Speed, standard, kph (mph) | 10.9 (6.8) |
| Two Speed Transmission Ground Speed, kph (mph) | 16.3 (10.1) |
| Drive Chain Rating | 2032 (80) |
| Axle Torque, Nm (lb-ft) | 6052 (4450) |
| Tire size - Standard | 10 x 16.5 8PR Extra wall |
| DIMENSIONS | |
| Length with Bucket, mm (in) | 3360 (132) |
| Length without Bucket, mm (in) | 2740 (108) |
| Width without Bucket, mm (in) | 1610 (63) |
| Height to ROPS, mm (in) | 1980 (78) |
| Height to Hinge Pin, mm (in) | 2990 (118) |
| Dump Height, mm (in) | 2380 (94) |
| Dump Reach, mm (in) | 950 (38) |
| Dump Angle, degrees | 42 |
| Bucket Rollback @ ground, degrees | 32 |
| Wheelbase, mm (in) | 1070 (42) |
| Ground Clearance, mm (in) | 217 (8.5) |
| Angle of Departure, degrees | 25 |
| WEIGHT | |
| SAE Operating weight, kg (lb) | 2928 (6450) |
| Specifications are based on published information at the time of publication.Specifications are subject to change without notice. | |
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. | |